You have no items in your shopping cart.
There comes a time whereby your home appliances and electric devices cease to work as you expected. This can lead to a situation where you will not be able to go about your daily chores with the convenience you had hoped for.
The cause of this issue could be identified from the common incidences that other washing machine users experience. Therefore, any individual or specialist, who you contact to assist you in the process of washing machine repairs, should be aware of how to help you solve frequent problems that arise from the continuous use of this device.
One of the common problems is when the machine gives out a lot of noise during its operation. This could most likely be because the pump motor is rattling or the tub bearings are worn. Another issue you could encounter is when your washer does not fill with water, which could be as a result of a faulty inlet hose, water inlet valve and lid switch.
Before you contact well trained specialists like appliances repair Aucklandto help you with this problem, you can simply try the following tips to make your machine work better;
Fixing the Noise
You will need a screw driver to get the snap retainers open, afterwards you can pull the water pump off the motor shaft. Disconnecting the electric connectors from the motor is the final step. After going through these steps you will notice that your coupler is most likely broken, because the appliance was overloaded. You can replace the coupler inexpensively.
Enable Your Washing Machine to Refill Again
Replace the water valve by simply removing the spoilt one and installing the new one; remember to also set the electrical connectors of the valve to the hot and cold positions appropriately. You can also get a new water valve system at a very affordable system.
Using these tips, you will be able to get your washing machine up and running in no time, no need to pay for expensive consultation charges from specialists.